Tiny Helmets Big Bikes
Check us out!
  • Home
  • Us
  • Blog: We Ride
  • FAQ
  • Our Fleet
  • Adventures
  • Getting Started
  • Contact Us

Josette asks: How to get comfortable on a cargo bike

5/23/2012

2 Comments

 
Hi there! I've been reading your blog while considering getting the Mundo for my own family/cargo needs. I did a test ride with my two-year-old in the peanut shell and the ride was wonderful but I actually tipped over the bike while trying to walk it out of its parked spot -- the bike all loaded up weighs more than me! I was wondering if you have any advice for new cargo-bike riders on how NOT to tip the bike over.

Cargo bikes do handle differently than other bikes, especially when it is loaded up. Almost always, if you're going to fall, it's going to be while you are mounting/dismounting. I recommend to start riding your new cargo bike in an open, empty location so you can get a good feel for how the bike moves without also having to deal with outside distractions. Practice turns, swerving, circles, hopping on/off, etc. You can try getting on and off the bike next to a curb so your foot falls flat and stable on the surface or lower your seat in the beginning until you are more comfortable (not recommended for long rides but it's a good starting point). Also, try to make sure your bike's load is evenly balanced and if possible, keep the weight close to the front of the rack. If one side is heavier, it is easier to lose control. Once you get more comfortable and confident while riding your cargo bike, you will be less likely to tip. Walking with the Mundo is a bit difficult, too. Keep one hand on the brake to help stabilize and move slowly. I also use my hip to help hold up the bike and keep both hands on the handlebars. 

That said--tipping happens. Sometimes, it's nice to get that first fall out of the way so you can see that it actually does less damage than one would believe (but I don't advocate doing it on purpose, of course). I have found that I am able to ride with a higher seat now, take tighter turns, and go faster because I am more used to the way my Mundo handles. One last piece of advice: regularly remind your little one to not make too many sudden moves :)
Picture
2 Comments

Patrick Asks: Does the Mini Yepp fit on the v.4 Mundo? 

5/22/2012

0 Comments

 
I'm thinking about buying a new Mundo (latest version). Do you know if the YEPP Mini (front mount) fits? I've seen photos on your site and others with the Mundo with the YEPP Mini but I'm not sure if the Mundo in the pictures was the latest version. I'm wondering if they changed the handlebar stem on the newest version. (Update: Patrick and family got their Mundo and their Mini Yepp! congratulations!!!)


My Mundo is the v.4 (latest version) and when I was looking all over for a front mounted seat, I could find all the photos of Mini Yepps, iBerts, and Bobikes but no one ever detailed how the installation went. Therefore, I just assumed the Mini Yepp would work easily. We had already tried the iBert and I didn't like the way it felt riding with it or the way Little Brother fit in it. It got in the way of my cables, scratched up the bike, didn't provide much back support, and the shoulder straps never seemed to stay up. The mount was difficult to take on/off and if the baby seat wasn't on, that mount looked like an injury waiting to happen. That said, some people love it. I don't. 

What happened when I went to install my Mini Yepp mount, I quickly realized that my stem was too thick. Some internet searching later and I found out that it is not made for a threadless stem as it's too thick. I was incredibly frusterated because I had been so sure that it would work. I did some more searching and found an adaptor for mountain bikes/threadless stems but everywhere I looked, it was always out of stock in the USA. Jose took a look and figured out that the mount had spacers in it and when he removed the spacers, it clamped on the stem, no problem. That was fine until a day or so later, I noticed that the Yepp was sliding all around when we rode. Turns out, it was clamped well onto the spacers but the spacers were moving freely, round and round, taking Little Brother with them. Bummer. More research later (ie. reading customer reviews) and I saw that someone mentioned that they just took out the spacers and clamped the mount directly onto the fork. I took the bike into Practical Cycle and talked with Tim who said that would be fine. The mount would act as the spacers in that situation. We gave it a go and many miles later, the Mini Yepp is still holding strong. I kept the spacers for when I no longer need the mount, I'll still be able to put it all back together. 

However, when I went to add the windshield, I found that there wasn't enough space between the mount and the stem so I then had to add a stem riser. Now, it's pretty perfect. It was a bit of a hassle to finally get here, but it does work. I love the Yepp seat, it's comfortable and lightweight. It's a better position for the little guy and for me to ride. The windshield is invaluable if you plan on riding regularly and gives you a foundation to put together a weather protector. 

That said, the v.4 Mundo can come with either a threaded stem (quill) or a threadless stem. Jose is a bike snob and won't even consider a bike with threaded stem (he's got roadie mentality and I actually got a threadless stem by chance). I really recommend getting a threaded stem if you are going to go with a front mounted seat like a Mini Yepp. It will just make life easier and you'll be out riding with your wee one quicker without as many headaches as I had. 
Picture
Looks like everyone fits on the Mundo happily!
0 Comments

Everyone asks: Weather Protectors

5/22/2012

7 Comments

 
I have gotten more questions about the sun hoods than anything else on our bikes. Here is a write up about how I put them together and how they work for us.
Picture
It is very important that if you are going to be out riding with the kiddos that they stay comfortable. I was worried about the impending summer heat and UV rays so I quickly set about fixing a weather protector for my two boys. We ride our Mundo "minivan" a lot! I had seen one done for the Peanut Shell that I tried but wasn't able to get it to work as well as Lindsay was and I still didn't have a solution for Little Brother up front. After a bit more searching on the Great Internet, I came across another design. This one used Kelty Sun Hoods (mine were on sale for $15) for backpacking backpacks. I liked that these gave full overhead protection as well as a bit of a screen in front. Sacramento gets lots of dust and debris so this gives me a little peace of mind when we are forced to ride through the cottonwood forests. 

For the Peanut Shell, I followed the blog's directions and drilled two holes along the top of the seat and two more on the sides. The original design had the holes in the front bar but with Big Brother getting bigger, he already has trouble getting in and out with the bar, I often take it off. I didn't want the poles to poke him in the legs. A couple of grommets and some electrical tape to keep them from falling off (you might want to get tighter grommets) and it was good to go. The front poles don't even have anything holding them in. Big Brother is able to pull them out but the angle that they go into the holes makes it so they don't fly out on their own. 
Picture
Picture
Finished product.
The Mini Yepp was actually even easier to put together since I didn't have to drill any holes, thanks to its holey design. I was using the Yepp Mini Windshield to keep the debris out of Little Brother's face ever since I found a stick in his eye. That worked pretty well but I still wanted the sun/rain protection. I was a bit worried that the cover would impair my riding since it makes it impossible for me to see the ground directly in front of me but as it turns out, I don't ever really look at the ground directly under me while riding. The only issue is that I can't see my bike computer to find out how fast I'm riding unless I peer around the cover. That's probably a good thing for me not to focus too much on it anyway. 

I first attached the back poles with a couple of zip ties and tucked the ends of the poles into the bottom bars of the seat's frame. It is the opposite of the Peanut Shells design where I have a lot of pole in the front and not so much in the back. The Mini Yepp has most of the cover's pole in the back and not as much hanging off the front. For the front attachments, I have the cover hanging over the windshield and am using outdoor Velcro to adhere it on. The little velcro straps of the cover loop around the velcro and are holding, so far. I worry about the heat melting off the adhesive but if needed, I can either drill holes into the Yepp bolster or use ties to attach the cover's loops to the handlebars/Yepp's handlebars. I've even ridden the bike without the front poles attached and unless there is a strong wind, it's not a problem. I wouldn't recommend riding like that always but if the velcro were to come off, you could still get to where you needed to go and ride until you had a chance to fix it. 
Picture
Zip ties
Picture
I have since replaced the velcro and used a bigger piece on each side.
The sun shades/weather protectors have been a great addition. It gives the boys their own little "pod" and more protection from the elements and maybe even a little more privacy. Bikers are exposed more than drivers and we get a lot of attention where ever we go. I'd like to think that this helps my wee ones feel a bit more protected and keeps them from being too overstimulated. The covers also say that they are "rain resistant." We haven't had any downpours yet but it will be nice to have something to keep them a little dryer and warmer as the seasons turn. This also provides a great foundation for any added stroller rain/sun covers that I might want to add in the future--which would probably be necessary if you lived in a climate with more extreme weather than Sacramento. 

It is a little more work to get the boys in and out of their seats but not by much. Both designs leave the poles free enough to easily pull out and tuck back in as needed. Big Brother does this on his own while getting in and out. Little Brother can usually get in/out without changing the poles but if needed, I can open the velcro tabs and tuck one of the poles out of the way, opening the cover up. The amount of protection if gives makes it totally worthwhile. As long as my boys are happy, comfortable, and safe, we'll be able to ride forever. 
Picture
Cozy, cozy!
Picture
Portable crib! (The amount of velcro has drastically increased for more durability).
Picture
Happy riders!
7 Comments

    Ask Away!

    Post a comment here or use the Contact Us form and I will do my best to answer your questions. Dialogues encouraged! 

    Contents

    • Respectful Drivers and Bikers
    • Getting Started On A Cargo Bike
    • Weather Protection
    • Mini Yepp + Mundo

    Archives

    May 2015
    June 2012
    May 2012
    April 2012

    Categories

    All
    Cargo Bikes
    Carrying Kids
    Mini Yepp
    New Riders
    Safety
    Weather Protection
    Yuba Mundo

    RSS Feed

Powered by Create your own unique website with customizable templates.